Auto Detection - D-Link AC1900 User Manual

Section 4 - Con guration
Select to automatically detect the IPv6 connection method
used by your Internet Service Provider (ISP). If Auto Detection fails, you
manually select another IPv6 connection type.
IPv6 DNS Settings
Select either Obtain DNS server address automatically or Use the
DNS Type:
following DNS address.
If Use the following DNS address is selected:
If you selected Use the following DNS address above, enter the
Primary DNS
primary DNS server address.
Server:
If you selected Use the following DNS address above, enter the
Secondary DNS
secondary DNS server address.
Server:
LAN IPv6 Address Settings
Enable or disable DHCP Pre x Delegation.
Enable DHCP-PD:
Displays the router's LAN link-local address.
LAN IPv6 Link-
Local Address:
If Enable DHCP-PD is disabled these additional parameters are available for
con guration:
Enter a valid LAN IPv6 address.
LAN IPv6 Address:
Displays the router's LAN link-local address.
LAN IPv6 Link-
Local Address:
D-Link DIR-878 User Manual

Auto Detection

38