Ipv6 In Ipv4 Tunnel - D-Link DIR-880L User Manual

Section 4 - Coniguration
The user can conigure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so
that IPv6 packets can be sent over an IPv4 infrastructure.
Enter the IPv4 remote address you will use.
Remote IPv4
Address:
Enter the IPv6 remote address you will use.
Remote IPv6
Address:
Enter the IPv4 local address you will use.
Local IPv4
Address:
Enter the IPv6 local address you will use.
Local IPv6
Address:
Enter the subnet preix length supplied by your ISP.
Subnet Preix
Length:
Select either Obtain DNS server address automatically or Use the
DNS Type:
following DNS address.
If you selected Use the following DNS address above, enter the
Primary DNS
primary DNS server address.
Server:
If you selected Use the following DNS address above, enter the
Secondary DNS
secondary DNS server address.
Server:
Enable or disable preix delegation services.
Enable DHCP-
PD:
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
LAN IPv6
router.
Address:
D-Link DIR-880L User Manual

IPv6 in IPv4 Tunnel

85