Ipv4/Ipv6 Rules - D-Link AC1900 User Manual

Section 4 - Con guration
The IPv4/IPv6 Rules section is an advanced option that lets you con gure what
kind of tra c is allowed to pass through the network. To con gure the IPv4
rules, from the Firewall Settings page click IPv4 Rules. To con gure IPv6 rules,
from the Firewall Settings page click IPv6 Rules. To return to the main Firewall
Settings page, click
To begin, use the drop-down menu to select whether you want to
the rules you create. You can also choose to turn ltering
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the
you edit or create a rule, the following options will appear:
Enter a name for the rule.
Name:
Enter the source IP address range that the rule will apply to, and using
Source IP Address
the drop-down menu, specify whether it is a
Range:
Enter the destination IP address range that the rule will apply to, and
Destination IP
using the drop-down menu, specify whether it is a
Address Range:
address.
Select the protocol of the tra c to allow or deny (
Port Range:
and then enter the range of ports that the rule will apply to.
Use the drop-down menu to select the time schedule that the rule
Schedule:
will be enabled on. The schedule may be set to
you can create your own schedules in the Schedules section. Refer
to Refer to Schedule on page 81 for more information.
Click Save when you are done.
D-Link DIR-878 User Manual

IPv4/IPv6 Rules

.
button. Click Save when you are done. If
or
.
or IP address.
or IP
, TCP, or UDP)
, or
68