Network; Dvr Server - Eyemax DVS-9030 Manual

Device
Select detailed schedule for actrivating sensor and alarm individnally.

(5) Network

74
[ EyeMax ]

DVR Server

Supported Network:
1. TCP/IP - Connecting to DVR Server from Client using Lan or DSL
2. PSTN - Connecting to DVR Server from Client using PSTN or ISDN modem
3. None - Not allowed to connect to DVR Server remotely
Port No.: The default port number is 9091.
Timeout: The time length of trials to connect to DVR Server from Client
Maximum Number of Users: The maximum number of users that can be logged in remotely.
Details: It shows all the port numbers that are available to use.
Bandwidth:
Make sure to select the right bandwidth to have the right network performance.
Note:
Eyemax will automatically appoint a proper IP address to router. No router setup is required.
Transmitted Video Quality:
Video quality to be transmitted to Client.
As a reminder, the higher video quality gets, the
slower network transmission speed becomes.
Therefore, it is often recommended to select low
video quality when using "Narrowband".
User's Manual ( 5.1.0.0 )
75