Datavideo SE-2200 Instruction Manual page 15

PIP Preview and PIP Program
When looking at the top right corner of the SE-2200 Control
Panel / Keyboard there are four PIP keys. These are
labelled Program and Preview. The upper PIP1 and PIP2
keys relate to activating Picture In Picture images on the
Program outputs. The lower PIP1 and PIP2 keys relate to
activating Picture In Picture images on the Multi-view and
Preview outputs (as well as allowing the assigning of a PIP
source)
For more detail, please see the Picture in Picture Function.
DSK Preview and DSK Program
When looking at the top right corner of the SE-2200 Control
Panel / Keyboard there are two DSK keys. These are
labelled Program and Preview. The upper DSK key relates
to activating Down Stream Keying on the Program outputs.
The lower DSK key relate to activating Down Stream Keying
on the Multi-view or Preview outputs. (as well as allowing
the assigning of the key source)
For more detail, please see the DSK Function.
LOGO 1
The LOGO 1 and LOGO 2 buttons are used to display pre-
selected logos on the SE-2200 Preview and Program
outputs. When the button is active the selected logo is
shown. These logos are selected from the switcher's
memory and positioned using a menu option.
LOGO 2 or CLOCK
The user cannot display LOGO 2 and CLOCK at the same
time. Instead use LOGO 1 and CLOCK together or use LOGO
1 and LOGO 2 together.
FTB
Fade To Black, this button fades the current video program
source to black. When pressed again it acts in reverse
from complete black to the currently selected program
video source.
SPEED
There are three speed buttons which can be defined by
the user. By pressing a speed button the user is choosing
the rate of transition or time taken when using the AUTO
TAKE button.
Note: Please enter the SE-2200 MENU and select
CONSOLE SETTINGS to set up SPEED BUTTON SETTING.
15