Start; Preparation Time; Interrupt Or End Tanning Session - ergoline SUN SELECT 1400 Operating Instructions Manual

Operation
28/76
6.6

Start

The device is started automatically with an internal or external timer.
NOTE:
Timer instructions see separate manual
(order no. 1008370-..).
6.6.1

Preparation time

Before the UV lamps turn on, you have a few minutes to prepare yourself.
During the preparation time you can switch on the UV lamps at any time by
pressing the START/STOP button.
– Remove your clothes and all jewelry.
– Remove make-up and other cosmetics.
– Remove glasses. Contact lenses can be worn under the protective
goggles.
– Put on the protective goggles.
– Lie down on the bed surface.
– Close the canopy.
– Press the START/STOP button.
Settings on start-up:
UV lamps

Facial tanner

Shoulder tanner

Body cooling

Facial cooling

Audio system

Voice Guide

6.6.2

Interrupt or end tanning session

The tanning session ends automatically after the preset time has run down.
The internal body cooling fan continues to run for approx. three (3) minutes to
sufficiently cool the device.
– To interrupt a tanning session, press and hold button START/STOP any-
time during a session.
– Press START/STOP again to restart the lamps.