Start; Preparation Time; Interrupt Or End Tanning Session - ergoline FLAIR 32 SUPER POWER Operating Instructions Manual

Operation
14
5.3
The device is started automatically with an internal or external timer.
NOTE:
Timer instructions see separate manual (order
5.3.1
WARNING!
Wrong positioning may result in overexposure!
WARNING!
To obtain the recommended exposure schedule position of a minimum
distance of 1/2" (13 mm) measured with a standard ruler:
– Lie on acrylic surface of lounge and lower canopy. Canopy will stop at
the correct distance from lounge acrylic surface.
Before the UV lamps turn on, you have a few minutes to prepare yourself.
During the preparation time you can switch on the UV lamps at any time by
pressing the Start/Stop button.
– Remove your clothes and all jewelry.
– Remove make-up and other cosmetics.
– Remove glasses. Contact lenses can be worn under the protective
goggles.
– Put on the protective goggles.
– Lie down on the bed surface.
11847 / 0
– Close the canopy.
– Press the Start/Stop button.
Settings on start-up:
UV lamps
•
Cooling
•
5.3.2
The tanning session ends automatically after the preset time has run down.
The internal fan continues to run for approx. three (3) minutes to sufficiently
cool the device.
– To interrupt a tanning session, press button Start/Stop anytime during a
session.
– Press Start/Stop again to restart the lamps.

Start

Preparation time

Interrupt or end tanning session

no. 0070923801-..)