10/2013
1014906-00
Navigation unit – operating handle
The tanning device is operated using the buttons mounted in the operating
handle in the canopy.
Switch tanning on and off, pause.
Confirm function.
This button's availability is displayed on the screen, depend-
ing on the function that has been selected.
Select device function
(go to indicator).
Select the sub-function (if available).
Alter the setting (for progress bar display),
e.g. regulating the temperature.
Change music title or studio channel (from default mode).
The availability of these buttons is displayed on the screen,
depending on the function that was selected.
All of the indicators displayed on the screen are illuminated in default mode
after the tanning device starts up.
The relevant indicator will start to flash after a device function has been se-
lected. The settings or selection options available for the selected function will
be displayed on the screen, see 'Operating structure' on page 22.
NOTE:
If a button is not pressed within 8 seconds, the settings re-
turn to default mode.
Operation
Operating instructions – 23/76