Table of Contents
Advertisement
Supports WEP / WPA Personal / WPA2 Personal encryption
Supports AP/ Client/ Repeater/ WDS/ AP+WDS mode
Seamlessly integrate wireless and wired networks
Provides MAC Filter function
Web-based configuration
1.3
LED Indicators
LED
Action
PWR
ON
SYS
ON
LAN 100M
ON
LAN LNK
ON
LAN ACT
Flashing
WLAN ACT
Flashing
1.4
Back View
Power (DC 9V): The receptacle where you plug in the power adapter.
Reset button: Resets your AP or resets the AP to the default login settings.
This indicator lights green when the Wireless AP is receiving power;
otherwise, it is off.
The LED will be dark for a few seconds when the system is started. After
that, the LED will stays green to show the Wireless AP is working normally. If
the LED stays blink or dark, it means the system is failed. Please try to
reboot the system or restore default settings.
Indicates the Ethernet is working in 100Mbps mode.
Indicates the LAN is connected.
Indicates the LAN has activity with data sending or receiving.
Indicates wireless interface has activity with data sending or receiving.
8
Function
Advertisement
Table of Contents
