Status - Planet Networking & Communication WAP-4036 User Manual

3.1

Status

This page will show most of the basic configuration parameters of the WAP-4036. It is the first page
shown after login as below. You can usually get context sensitive help by clicking on the Help link at
the top right of the page.
Parameter
LAN Status
Wireless Status
System Information
To apply any settings you've altered on any page, click the Save button. Otherwise the
modified settings would be lost after the AP reboot.
This section shows the LAN interface parameters of the wireless AP. This
includes information such as: The MAC address of LAN interface, IP/Subnet
Mask, DHCP Server (whether the DHCP Server is Enables or disables, and
display address pool).
This section shows the WLAN interface parameters of the wireless AP. This
includes information such as: Wireless (whether Wireless interface status is
active), Connection (whether have active wireless stations that are connecting
to the AP and display number of them), The MAC address of WAN interface,
Radio Band (The type of transmission protocol your wireless network uses),
SSID, channel number, security.
This section shows the installed version of the firmware of the WAP-4036.
And company information.
Descriptions
12