Configuring Printer Hardware Options - Oki MC852 Network Manual

appletalk.(leopard.only)
NOTE
AppleTalk is not supported in Snow Leopard.
1. Choose apple.Menu.>.system.Preferences.>.Print.&.fax.
2. Click "+".
3. Select your printer model from the Default Browser.
4. Click add....
5. Depending on the connection type, you may be prompted to configure any additional
printer hardware options. If your printer has options such as a storage device or
second tray, switch on the relevant options.
tcP/IP.connection
1. Choose apple.Menu.>.system.Preferences.>.Print.&.fax.
2. Click "+".
3. Click the IP.Printer button.
4. From the Protocol menu, choose line.Printer.daemon.–.lPd.
5. Enter the printer's IP address in address.
To find the printer's IP address, you can print a configuration page from the printer's
operator panel. Refer to
6. Check the correct PPD file for your printer is selected in the Print Using menu.
7. Click Add.
8. You will be prompted to configure any additional printer hardware options. If your
printer has options such as a storage device or second tray, switch on the relevant
options. Refer to
c
onfIgUrIng.PrInter.hardware.oPtIons
NOTE
Applies to IP and Rendezvous network connections only.
If you have added additional hardware, for example additional paper trays, to your printer
these must be enabled in the printer driver.
1. Choose apple.Menu.>.system.Preferences.>.Print.and.fax.
2. Click the Printers menu, and choose show.Info.
3. From the popup menu, select Installable.options.
4. Select any options appropriate to your hardware, and click apply.changes.
"Printing the configuration page" on page
"Configuring printer hardware options" on page
Mac OS X > 51 Mac OS X > 7
4.
7.