Cisco ASR 9000 Series Configuration Manual page 96

How to Configure ANCP on Cisco ASR 9000 Series Routers
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#
Step 2
ancp neighbor sender-name { H.H.H |
A.B.C.D }[description string ]
Example:
RP/0/RSP0/CPU0:router(config)# ancp
neighbor sender-name oo13.1aff.c2bd
description vendorA1
Step 3
ancp neighbor sender-name { H.H.H | A.B.C.D }
[adjacency-timer interval ]
Example:
RP/0/RSP0/CPU0:router(config)# ancp
neighbor sender-name 0013.1aff.c2bd
adjacency-timer 20
Cisco ASR 9000 Series Aggregation Services Routers Modular Quality of Service Configuration Guide
QC-86
D r a f t — C i s c o C o n f i d e n t i a l
configure
ancp neighbor sender-name {H.H.H | A.B.C.D}[description string]
ancp neighbor sender-name {H.H.H | A.B.C.D}[adjacency-timer interval]
end
or
commit
show ancp neighbor {description description- string | sender-name {H.H.H |
A.B.C.D}}[statistics][detail]
show ancp neighbor summary [statistics] [detail]
clear ancp neighbor {all | description description- string | sender-name {H.H.H | A.B.C.D}}
[state | statistics]
clear ancp summary [statistics | detail]
show ancp neighbor [all] [statistics]
show ancp neighbor state {none | synsent | synrcvd | estab} [statistics]
Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
Purpose
Enters global configuration mode.
Sets neighbor description parameter to easily
identify DSLAMs.
Sets neighbor adjacency timer parameter. If a
neighbor session is already established, it will be
reset so this timer can take affect.
OL-17239-01