Cisco ASR 9000 Series Configuration Manual page 31

Configuring Modular Quality of Service Packet Classification on Cisco ASR 9000 Series Routers
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
interface type instance
Example:
RP/0/RP1/CPU0:router(config)# interface
gigabitethernet 0/1/0/0.1
Step 3
service-policy {input | output} policy-map
[shared-policy-instance instance-name ]
Example:
RP/0/RSP0/CPU0:router(config-if)#
service-policy output policy1
shared-policy-instance ethernet101
OL-17239-01
D r a f t — C i s c o C o n f i d e n t i a l
configure
interface type instance
service-policy {input | output} policy-map [shared-policy-instance instance-name]
end
or
commit
show policy-map shared-policy-instance instance name [input | output] location
rack/slot/module
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
How to Configure Modular QoS Packet Classification on Cisco ASR 9000 Series Routers
Purpose
Enters global configuration mode.
Enters interface configuration mode and configures a
subinterface.
Attaches a policy map to an input or output subinterface to
be used as the service policy for that subinterface.
In this example, the traffic policy evaluates all traffic
•
leaving that interface.
QC-21