Config; Rm Setup; Sw Assign; Direction - Sony RM-IP500 Operating Instructions Manual

Hide thumbs Also See for RM-IP500:
Table of Contents

Advertisement

CONFIG

This menu is used to configure functions of the unit.
Note
During CONFIG menu operation, operation using
controls other than the buttons and knobs on the menu
control block is not supported.

RM SETUP

Sets the operation of the unit.
AE CONFIG
You can select the following exposure modes when the
AE button on the lens control block is off. To apply the
setting, after selection, turn the AE button on and then
off again.
Settings (Bold:
Description
default value)
MANUAL
The gain (GAIN), electronic shutter
speed (SPEED), and iris (IRIS) can be
adjusted manually.
SHUT Pri
Automatically adjusts the exposure
using the gain and iris. Adjust the
electronic shutter speed (SPEED)
manually.
IRIS Pri
Automatically adjusts the exposure
using the gain and electronic shutter
speed. Adjust the iris (IRIS) manually.
GAIN Pri
Automatically adjusts the exposure
using the electronic shutter speed
(SPEED) and iris (IRIS). Adjust the
gain (GAIN) manually.
CAM POWER
Settings (Bold:
Description
default value)
EACH
Only the target camera turns on/off
when using the CAM POWER button.
ALL
All cameras registered in the camera
table turn on/off when using the CAM
POWER button.
ZOOM
Settings (Bold:
default value)
LEVER
JOYSTICK
CAMERA FREQ
Settings (Bold:
default value)
59.94
50
* The shutter speed is displayed in the status display (page 38)
for the ASSIGN 3 button.

SW ASSIGN

Assign functions to the ASSIGN 1 to ASSIGN 6 buttons
of the unit.
Note
In this version, the assignment of the ASSIGN buttons is
fixed and cannot be changed.
Assign
Settings
button
ASSIGN 1
BACK LIGHT
ASSIGN 2
FLICKER
ASSIGN 3
STATUS
ASSIGN 4
DETAIL
ASSIGN 5
KNEE
ASSIGN 6
AE LEVEL

DIRECTION

Sets the control direction of the joystick, ZOOM lever,
and FOCUS knob.
JOYSTICK PAN
Settings (Bold:
default value)
STANDARD
REVERSE
46
Description
Controls the zoom of the target camera
using the ZOOM lever on the lens
control block.
Controls the zoom of the target camera
using the ZOOM ring on the joystick.
Description
Selects the frame rate for the shutter
speed displayed in the menu. You can
select from 59.94 [Hz] and 50 [Hz].
Description
Settings are fixed.
Description
Inclining the joystick to the right pans
the camera to the right. Inclining to the
left pans the camera to the left.
Inclining the joystick to the right pans
the camera to the left. Inclining to the
left pans the camera to the right.
*

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents