Side / Front - Sony RM-IP500 Operating Instructions Manual

Side / front

1
1
A Screw hole protective covers
When mounting the unit on other than a flat surface,
remove the screw hole protective covers and secure
the unit in place with screws.
There are a total of six covers on the front, left, and
right sides.
Note
• Use standard size screws with the following
dimensions.
M3 screw
4
4
=6 mm to 10 mm
• Do not overtighten the screws. Overtightening
the screws may damage the unit.
• Store the removed screw hole protective covers in
a safe location.
• Using screws other than 6 mm to 10 mm may
result in faulty installation or damage to the
interior of the machine, resulting in malfunction.
1
1
2
Removing the screw hole protective covers
1
Bend the tip of a thin rod about 2 mm, and insert it
into the hole of the screw hole protective cover.
Use a paper clip or other object with a diameter of
about 1 mm.
2
Pull the screw hole protective covers straight out.
B Ratings label (bottom)
Displays the model name and electrical ratings
information.
IMPORTANT
The nameplate is located on the bottom.
11