Lcd Panel - Sony RM-IP500 Operating Instructions Manual

GAIN button: Press this button to display the gain
value settings screen for the camera on the LCD
panel.
SHUTTER button: Press this button to display the
shutter speed value settings screen for the
camera on the LCD panel.
ASSIGN 4 button, ASSIGN 5 button, ASSIGN 6
button: Press these buttons to display the
corresponding setup item and setting of the
function assigned to each button on the LCD
panel.
In this version, the following functions have
been assigned, and cannot be changed.
Button name Assigned menu item
ASSIGN 4 Sets DETAIL LEVEL on the target
camera.
ASSIGN 5 Sets KNEE POINT on the target
camera.
ASSIGN 6 Sets AE LEVEL on the target camera.
For details about menu operations, see "Menu
Operations" (page 12).
B LCD panel
Displays the RM menu, FUNCTION menu, and
preset memory numbers.
• For details about menu operations, see "Menu
Operations" (page 12).
• For details about the RM menu, see "RM Menu
List" (page 43).
• For details about the FUNCTION menu, see
"Setting Specific Functions using Shortcuts
(FUNCTION Menu)" (page 37).
• For details about preset numbers, see "Storing the
Camera Status (Preset Function)" (page 34).
C SELECT knob and button
Use to select menu items.
For details about menu operations, see "Menu
Operations" (page 12).
D VALUE knob and button
Use to select the settings of menu items.
For details about menu operations, see "Menu
Operations" (page 12).
E CANCEL button
Use to move from a lower level to a higher level in
the hierarchy for menu items that have a multi-level
hierarchy.
F RM MENU button
Press this button to display the setup menu of the
unit on the LCD panel.
For details about menu operations, see "Menu
Operations" (page 12).
G CAM MENU button
Press and hold this button to display the setup menu
of the camera on the monitor output of the camera.
Nothing is displayed on the LCD panel of the unit.
For details about operation, see "Operating the
Camera Setup Menu from the Unit (Camera Menu
Operation Mode)" (page 35).
Camera selection block
Use to select the target camera to control.
When using LAN connection, the unit can control up to
100 cameras.
When using serial connection, the unit can control up to
7 cameras.
1
A CAMERA 1 to CAMERA 10 buttons
Selects the target camera from within a group.
For details about selecting the target camera, see
"Selecting a Camera" (page 27).
B GROUP LEFT button, group number display,
GROUP RIGHT button
Select the target camera group using the GROUP
LEFT button and GROUP RIGHT button. The
number of the selected group is displayed in the
group number display.
Group numbers are used with LAN connections.
For details about selecting a group, see "Selecting a
Camera" (page 27).
Lens control block
Use to control the lens (adjustment and settings) of the
target camera.
The lens control block is enabled when the 5 ACTIVE
button is lit. Note that the ZOOM SPEED knob is always
enabled.
7
2