Rack Mounting Kd-Ip922 - Key Digital KD-IP922ENC Operating Instructions Manual

Enterprise av over ip encoder

Hide thumbs Also See for KD-IP922ENC:

Table of Contents

Selectable via Input Select button or via TCP/IP or RS-232 command

LED light illuminated when active HDMI signal link (TMDS) from source is present

Audio Output

Variable settings are independent of KD-IP922ENC

Features variable volume, muting, bass, mid, treble, and lip-sync level adjust

controllable via TCP/IP or RS-232 command strings

LAN Ports

Default IP Address = 192.168.2.100

IP LED

Indicates healthy audio/video system status

Decoder: Successful connection with selected Encoder

Steady blink during boot up

System LED

Indicates healthy control system status

Steady blink during bootloader mode and firmware updates

USB-A Ports

Used for connecting USB endpoints (ie keyboard, mouse)

Not used to connect USB Host / Computer

Supports connectivity to USB hubs but may not exceed 15 endpoint devices

USB input/output relationship automatically follows video input/output relationship

Reset Pin

Press and hold for 10 seconds to reset unit to factory default settings:

IP Address = 192.168.2.100

Selected video input source = Must be established

Rack Mounting KD-IP922

Key Digital KD-SMS16 is a universal rack shelf that can holds up to 16 KD-IP922 units

utilizing the side mounting screws.

KD-SMS16 supports any Key Digital unit with side mounting screw spacing of 2.912",

2.582", or 2.252".

Table of Contents

Kd-ip922dec