Unit And System Setup Using Kd-Wizard Software - Key Digital KD-IP922ENC Operating Instructions Manual

16
Other common configurations that can be achieved due to the dual LAN port feature include:
8 video sources may have up to 80 displays/outputs if using two 48 port network switches
›
(8*2) + 80 = 96
»
16 video sources may have up to 64 displays/outputs if using two 48 port network switches
›
(16*2) + 64 = 96
»
24 video sources may have up to 48 displays/outputs if using two 48 port network switches
›
(24*2) + 48 = 96
»
32 video sources may have up to 32 displays/outputs if using two 48 port network switches
›
(32*2) + 32 = 96
»
Larger systems are possible with Enterprise AV using 10G and 100G SFP network switches.

Unit and System Setup using KD-Wizard Software

IMPORTANT: Configure units after properly configuring your network switch according to Key
›
Digital's Verified Network Switch document. Document is found on the KD-IP922 product
pages: http://www.keydigital.com/Items.asp?ItemCode=KDIP922ENC&Company=KEY
Organize and label all units before configuring
›
1. Download, install, and open Key Digital
2. Connect USB from PC to Encoder #1
3. Press USB Device to begin scan for connected unit
Wizard software
®
4. Properties Window
a) FW Version and Release Date text will be RED if a newer firmware is available
»
b) Update firmware by expanding Firmware Update workspace and select Update
»
Firmware button
c) Firmware Update dialog popup will show progress. Close dialog popup after
»
completion.
Note: KD-IP922ENC and KD-IP922DEC feature two firmware types and two buttons
for updating firmware. Be sure to update both firmware files
d) Set desired Device name with up to 16 characters (ie "DirecTV 1", "Conf Projector")
»
i) Do not use special characters such as !, @, $, ?
»
e) Set desired System Group ID according to desired Input (encoder) or Output
»
(decoder) number assignment for unit within virtual matrix system
1.0.8
17