Key Digital KD-IP922ENC Operating Instructions Manual page 16

28
-- 0002: DN=IP922DEC0002 , MAC=60:89:B1:92:00:02, GID=0002, LINK=ON --
-- IP=192.168.002.102, IN=0002, OUT=ON
-- AV=99, AB=20, AL=12, AM=12, AH=12, AD=00, MUTE=OFF
-- VW=OFF, VID=00, MWH=01, MWV=01, MWP=001, SWH=01, SWV=01
-- SWP=001, BWL=0001, BHL=0001, SWL=0001, SHL=0001, MSL=000
-- MSR=000, MSU=000, MSD=000, SUH=0000, SUV=0000, SRR=0
-- 0003: DN=IP922DEC0003 , MAC=60:89:B1:92:00:03, GID=0003, LINK=ON --
-- IP=192.168.002.103, IN=0003, OUT=ON
-- AV=99, AB=20, AL=12, AM=12, AH=12, AD=00, MUTE=OFF
-- VW=OFF, VID=00, MWH=01, MWV=01, MWP=001, SWH=01, SWV=01
-- SWP=001, BWL=0001, BHL=0001, SWL=0001, SHL=0001, MSL=000
-- MSR=000, MSU=000, MSD=000, SUH=0000, SUV=0000, SRR=0
-- 0004: DN=IP922DEC0004 , MAC=60:89:B1:92:00:04, GID=0004, LINK=ON --
-- IP=192.168.002.104, IN=0004, OUT=ON
-- AV=99, AB=20, AL=12, AM=12, AH=12, AD=00, MUTE=OFF
-- VW=OFF, VID=00, MWH=01, MWV=01, MWP=001, SWH=01, SWV=01
-- SWP=001, BWL=0001, BHL=0001, SWL=0001, SHL=0001, MSL=000
-- MSR=000, MSU=000, MSD=000, SUH=0000, SUV=0000, SRR=0
-------------------------------------------------------------------------
, HPD=ON ,HCP=ON , DG=ON --
--
--
--
--
, HPD=ON ,HCP=ON , DG=ON --
--
--
--
--
, HPD=ON ,HCP=ON , DG=ON --
--
--
--
--
IR Control is possible using remote model KD-REMOTEHM88 (sold separately)
Use the numerical keypad for X, Y, and Z values below. X, Y, and Z values may be up to four
button presses.
All unit setup should be completed in the KD Wizard software found on
www.keydigital.com
Command
Audio Input Setup
Set Analog Input x by y [1=Unbalanced, 2=Balanced]
Output Video Setup
Set Output x to Video Input y
Set Output x Video Input Up
Set Output x Video Input Down
Set All Outputs to Video Input y
Set All Outputs to Video Input Up
Set All Outputs to Video Input Down
Set Analog Input xx by y [1=Unbalanced, 2=Balanced]
Set Output x to Video Input y
Set Output x Video Input Up
Set Output x Video Input Down
Set All Outputs to Video Input y
Set All Outputs to Video Input Up
Set All Outputs to Video Input Down
Set All Outputs to Pass Through
Set Output x Video Mute Enabled/Disabled
Set Output x ON/OFF
Set Output x Debug Mode ON/OFF
Set All Outputs Video Mute Enabled/Disabled
Set All Outputs ON/OFF
Set All Outputs Debug Mode ON/OFF
Audio Output Setup
Set Analog De-Embed Source to y [1=HDMI, 2=EXT.
AUDIO L/R]
Set Output x Audio Volume to yy yy=[00-99]
Set Output x Audio Balance to yy, yy=[00-40],U,D
29
Sequence
R2, X, Audio Mode, Y
R1, X, X, X, X, Video Mode, Y, Y, Y, Y
R1, X, X, X, X, Video Mode, UP
R1, X, X, X, X, Video Mode, DOWN
R1, Video Mode, Y, Y
R1, Video Mode, UP
R1, Video Mode, DOWN
R2, X, Audio Mode, Y
R1, X, Video Mode, Y
R1, X, Video Mode, UP
R1, X, Video Mode, DOWN
R1, Video Mode, Y,
R1, Video Mode, UP
R1, Video Mode, DOWN
R1, Video Mode, Audio Mode
R1, X, Video Mode, Mute/Restore
R1, X, Video Mode, R2, Restore/Mute
R1, X, Video Mode, R3, Restore/Mute
R1, Video Mode, Restore/Mute
R1, Video Mode, R2, Restore/Mute
R1, Video Mode, R3, Restore/Mute
R2, Audio Mode, Y
R1, X, Volume, Y, Y