Ip Settings - RGBlink FLEX DS1 User Manual

Chapter 2: Installing Your Product

2.3 IP Settings

(1) Turn on the power of DS1.
(2) Connect DS1 and computer with a LAN cable.
(3) The IP address of DS1 will be displayed on the screen during the starting up.
(4) For example, if the IP address shown on the screen is 192.168.100.2, follow the steps as
below to set the IP of the computer:
Set the IP of the computer as 192.168.100.6 and the subnet mask as 255.255.255.0.
- Open the "Network and Sharing Center" of the computer;
- Select "Change Adapter Settings";
- Right click "Ethernet" and select "Properties";
- Double click the "Internet Protocol Version 4 (TP/IPv4)"
- Type in the IP address and subnet mask;
- Click "OK" to apply.
(5) Open Google Chrome, type in the IP address (192.168.100.2, which should be the same with
the IP shown on screen) at the address bar. Both the user name and password are "admin".
6