Toshiba MMU-AP0072H2UL-1 Service Manual page 128

No. Part name
1. Detachment
Drain pan
10
1) Carry out work of Detachment of
2) Take off the drain cap and then extract
NOTE :
When taking off the drain cap, be sure to
receive drain water by a bucket, etc.
3) Remove the drain hose while picking the
4) Peel off insulator adhered to discharge
5) Remove the drain pan while sliding it to
2. Attachment
1) Insert the drain cap surely up to the end of
2) Slide the drain cap from discharge side
3) Attach step screw removed in the
4) Using the hose band, mount the drain
5) Carry out work of Attachment of
Procedure
drain water accumulated in the drain pan.
hose band and move it out of connecting
section of the drain pan.
side of the drain pan and then remove the
sep screw inside.
AP018 toAP024: Step screw, 1 pc.
AP036 toAP042: Step screw, 2 pcs.
The peeled-off insulator is used at
attachment work.
discharge side.
the drain pan.
and then hang it surely to the sheeted
hooking section at the fan side.
Detachment work and adhere the insulator
over it.
hose removed in the Detachment work.
.
9
Drain hose Drain hose Drain hose
Hose band Hose band Hose band
Insulator Insulator Insulator
Drain cap Drain cap Drain cap
.
9
128
Remarks
Step screw Step screw Step screw