Toshiba MMU-AP0072H2UL-1 Service Manual page 100

No. Part name
1. Detachment
Electric parts
2
cover
2. Attachment
Procedure
1) Carry out work of Detachment of
2) Remove the fixing screw "A" which fixes
the electric parts cover and loosen the
fixing screw "B".
3) Pull down the electric parts cover, remove
pin of the bell mouth and then slide it to
the arrow direction in order to open the
claws and the electric parts box cover.
4) Remove the hinge unit and then remove
the electric parts box cover.
1) Attach the hinge unit of the electric parts
box cover.
2) Close the electric parts cover and slide it,
hook claw of the electric parts box, claw
of the electric parts box cover and the
Dharma doll hole, and then insert pin of
the bell mouth into hole of the electric
parts box cover.
3) Tighten the fixing screws "A and B" and
then fix the electric parts box cover.
4) Following to work of Attachment of
mount the suction grille as before.
Bell mouth pin
.
1
,
1
100
Remarks
Claw of
electric parts box
Potbelly hole
(Dharma doll hole)
"
Sliding g Sliding
direction
"
Claw of electric
parts box cover
Hinge Electric parts box cover
rection
electric
x cover