Canon POD Deck Lite-C1 Service Manual page 78

● Rear
1. Remove the 2 Lifter Wire Pulleys (small and large) from top of the Compartment.
• 2 Screws
2. Remove the Lifter Wire Shaft Gear.
• 1 E-ring
• 1 Parallel Key
3. Remove the fixing parts from the Lifter Shaft.
• 1 Screw
• 1 Lifter Wire Fixing Cover
• 1 Pulley Fixing Plate
2x
1x
72
4. Disassembly/Assembly