Canon POD Deck Lite-C1 Service Manual page 131

13. Insert the 2 positioning pins to the holes of the host
machine and then fix the base stay.
• 3 Screws (Binding screws; M4x5)
Binding
M4x5
3x
14. Connect the POD Deck Lite with the host machine.
NOTE:
• Do not nip the cable between the POD Deck Lite and
the host machine when connecting.
NOTE:
• When inserting the rear connection pin into the rear
latch hole is difficult, loosen the 2 screws fixing the
latch plate and then adjust the position of the latch
plate to fit it. Check that the latch plate is not
positioned at an angle when installing.
125
6. Installation