Canon POD Deck Lite-C1 Service Manual page 105

■ Adjustment Procedure
1. Execute the following service mode and set amount of the airflow between -10 to 10. The airflow is increased by an
increment of the setting value.
• upstream
Service Mode > COPIER > OPTION > FEED-SW > DK1-ALVU
(LV2)
• downstream
Service Mode > COPIER > OPTION > FEED-SW > DK1-ALVD
(LV2)
NOTE:
Enter the same setting value for upstream and downstream.
2. Print out from the POD Deck Lite and check the paper separation. Adjust the paper separation again in case that it
is not optimum air flow amount.
99
5. Adjustment