Installation Procedure - Canon POD Deck Lite-C1 Service Manual

4. Slide the POD Deck Lite until it stops with holding
the release lever.

Installation Procedure

1. Remove the Right Cover.
• 5 Screws
5x
2. Open the Compartment while unlocking the release
lever.
3. Remove the Right Cover.
• 5 Screws
5x
4. Open the Compartment until it stops while releasing
stoppers with pressing the left and right Latches.
5. Remove the Heater Connector Cover (the removed
cover is used at procedure 8).
• 2 Protrusions
• 1 Claw
140
6. Installation
Protrusion
Claw