Hardware Installation; Installation Requirements; Mounting Bracket - TP-Link EAP120 Installation Manual

Hardware Installation

The EAP can be wall or ceiling mounted and can be powered via a PSE device
or the provided adapter. Please suitably arrange your wire layout before the
mounting.

1. Installation Requirements

Check and prepare the following items in the package for installation.
One EAP
Three Nuts/ Washers/ Plastic Extending Tubes/ Self-tapping Screws/ Pan Head Screws
Besides the above installation kits, these tools may be needed for hardware
installation: pencil, ruler, drill, hammer, screwdriver and ladder.

2. Mounting Bracket

The following figure describes the structure of the mounting bracket.
ARROW 2, to align with
ARROW 1 under the
interface panel
Ceiling mounting slot
Wall mounting slot
Locking clip
One Mounting Bracket
Mounting Bracket
One Installation Guide
04