TP-Link EAP120 Installation Manual page 6

RESET
With the device powered on, press and hold the RESET button for about 8 seconds,
and then release the button. The device will restore to factory default settings.
CONSOLE
This port is used to connect with the serial port of a computer or a terminal to
check and monitor simple system information of the device.
ETHERNET
This port is for connection to a router or switch to transmit and receive data as well
as to a PSE device for power supply. Power sourcing equipment (PSE) is a device
such as a switch that provides power over Ethernet cables to linked devices.
ON/OFF
Press this button to power on/off the device. Please remember to press it to use
the device.
POWER
The power jack is for connection to the power adapter. Please use the power
adapter provided. Refer to Powering Mode to learn how to power the device via
PoE and power adapter.
ARROW 1
To align with ARROW 2 in the mounting bracket before the EAP locks into place.
Please refer to Mounting Bracket to locate ARROW 2.
03