TP-Link EAP Series How To Upgrade

How to upgrade EAP Series via EAP Controller
Notice:

After you downloaded the firmware from TP-LINK website,
decompression software such as WinZIP or WinRAR to extract the
firmware file to a folder;

It is NOT recommended to upgrade via

Do NOT turn off the power or cut down the Ethernet cable during
upgrade process;

It is recommended to backup the current settings so you can restore
the settings manually after the upgrade.
This guide is applicable EAP series with Controller. Please verify the model of your
devices from the label on the device to choose the correct firmware:
Step 1 Search the Model number you found on the label on TP-LINK Website and
download the corresponding firmware. Extract the downloaded file to a folder,
you will see a .bin file.
Step 2 Follow the User Guide
EAP Controller.
Step 4 Login to the web interface of EAP Controller and go to System  Batch
Upgrade.
wireless
to run EAP Controller and open the web interface of
connection;
please use