TP-Link EAP120 Installation Manual page 15

Step 2: Wireless Access
1. Make sure the management host is set to obtain IP address automatically.
2. Join the wireless network. The default SSID and password are shown below.
SSID: TP-LINK_2.4GHz_XXXXXX or TP-LINK_5GHz_XXXXXX for EAP220; TP-
LINK_2.4GHz_XXXXXX for EAP120. XXXXXX is the last 6 characters of EAP's
MAC address.
Password: Password is empty.
Step 3: Quick Setup
Open a web browser and type in http://tplinkeap.net to log in to the EAP.
1.
The default user name and password are admin. In the Cluster mode, the
login will be directed to the Master EAP.
2. Create a new user name and password.
3. Follow instructions step by step to complete Quick Setup.
Congratulations! The above configurations on the Master EAP will be synchronized
to all the other EAPs automatically. Now you can enjoy the wireless network.
If you want to perform more configurations, please connect to the new SSID.
Option 2: Wired Login
Master EAP
Cluster
Internet
Router
Switch
Slave EAP
Sample Network Diagram for Wired Login
Management Host
Slave EAP
12