JVC UX-QD9S Service Manual page 9

3.1.4 Removing the front panel assembly
(See Figs.6 to 8)
• Remove the rear cover, side panels(L)/(R) and top cover as-
sembly.
(1) From the left side of the main body, disconnect the card
wires from the connectors (CN702, CN710) on the micon
board. (See Fig.6.)
(2) From the right side of the main body, disconnect the earth
wire from the micon board. (See Fig.7.)
(3) From the both sides and bottom sides of the main body, re-
lease the joints c and joint d. (See Figs.6 to 8.)
(4) Remove the front panel assembly in the direction of the ar-
row. (See Figs.6 to 8.)
Front panel assembly
CN710 CN702
Micon board c
Fig.6
c
Earth wire
Front panel assembly
Fig.7
Front panel assembly
d
Fig.8
Micon board
(No.MB338)1-9