JVC UX-QD9S Service Manual page 15

3.1.16 Removing the DVD mechanism assembly
(See Figs.21 and 22)
• Remove the rear cover, side panels(L)/(R), top cover assem-
bly, heat sink, main board, regulator board, transformer board
and joint board.
(1) From the top side of the main body, disconnect the card
wires from the connectors
con board. (See Fig.21.)
(2) From the left side of the main body, remove the spacers fix-
ing the card wires. (See Fig.21.)
(3) From the top side of the main body, remove the two screws
AA attaching the DVD mechanism bracket. (See Fig.21.)
(4) Move the DVD mechanism bracket in the direction of the
arrow to release the claws i and remove the DVD mecha-
nism bracket. (See Fig.21.)
(5) Remove the screw AB attaching the DVD mechanism as-
sembly. (See Fig.22.)
(6) Take out the DVD mechanism assembly from the main
body. (See Fig.22.)
(CN705 and CN711) on the mi-
CN711
CN705
Card
wire
Spacer
Spacer
AA
CN711
CN705
AA
DVD mechanism bracket
Fig.21
DVD mechanism assembly
Fig.22
Card
wire
Micon board
i
i
AB
(No.MB338)1-15