JVC UX-QD9S Service Manual page 18

3.2.3 Removing the tray assembly
(See Figs.3 and 4)
• Remove the DVD cover.
(1) From the right side of the DVD mechanism assembly, push
the slide cam and pull the tray assembly out of the DVD
mechanism assembly in the direction of the arrow. (See
Fig.3.)
(2) From the top side of the DVD mechanism assembly, re-
move the two screws C attaching the tray assembly. (See
Fig.4.)
(3) Remove the bushing of the tray assembly from the projec-
tions c on the DVD mechanism assembly and take out the
tray assembly in an upward direction. (See Fig.4.)
3.2.4 Removing the LED board
(See Fig.5)
• Remove the DVD cover and tray assembly.
(1) From the top side of the tray assembly, remove the sec-
tions d which were fixed in bond.
(2) Remove the double-stick tape attaching the LED board and
take out the LED board.
Note:
When removing the LED board, be sure not to damage the
LED board.
1-18 (No.MB338)
Tray assembly DVD mechanism assembly
Slide cam
Fig.3
C
c
DVD mechanism assembly
Tray assembly
Fig.4
Tray assembly
Double-stick tape
Fig.5
Shaft guide
c
d
d
LED board