HP VSR1000 Security Configuration Manual page 58

1. Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2. Determine whether to configure the default accounting method for all access types or service types.
The default accounting method applies to all access users. However, the method has a lower
priority than the accounting method that is specified for an access type or service type.
Configuration guidelines
When configuring accounting methods, follow these guidelines:
• FTP, SFTP, and SCP users do not support accounting.
Local accounting does not provide statistics for charging. It only counts and controls the number of
•
concurrent users who use the same local user account. The threshold is configured by using the
access-limit command.
Configuration procedure
To configure accounting methods for an ISP domain:
Step
1. Enter system view.
2. Enter ISP domain view.
3. Specify the default
accounting method for all
types of users.
4. Specify the command
accounting method.
5. Specify the accounting
method for login users.
6. Specify the accounting
method for portal users.
7. Specify the accounting
method for PPP users.
Command
system-view
domain isp-name
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
accounting command hwtacacs-scheme
hwtacacs-scheme-name
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
accounting portal { local [ none ] | none |
radius-scheme radius-scheme-name [ local ]
[ none ] }
accounting ppp { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
48
Remarks
N/A
N/A
By default, the accounting
method is local.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for command accounting.
By default, the default
accounting method is used
for login users.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for portal users.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for PPP users.
The none keyword is not
supported in FIPS mode.