HP VSR1000 Security Configuration Manual page 113

IPv4:
Portal status: Enabled
Authentication type: Layer3
Portal Web server: newpt
Authentication domain: Not configured
Bas-ip: 20.20.20.1
User Detection:
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authenticate subnet:
IP address
IPv6:
Portal status: Disabled
Authentication type: Disabled
Portal Web server: Not configured
Authentication domain: Not configured
Bas-ipv6: Not configured
User detection: Not configured
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authenticate subnet:
IP address
Before passing portal authentication, a user that uses the HP iNode client can access only the
authentication page http://192.168.0.1 1 1:8080/portal. All Web requests from the user will be redirected
to the authentication page.
• The user can access only subnet 192.168.0.0/24 (permitted by ACL 3000) after passing only
identity authentication.
The user can access Internet resources (permitted by ACL 3001) after passing both identity
•
authentication and security check.
# After the user passes identity authentication and security check, use the following command to display
information about the portal user.
[Router] display portal user interface gigabitethernet 2/0
Total portal users: 1
Username: abc
Portal server: newpt
State: Online
Authorization ACL: 3001
MAC
0015-e9a6-7cfe
Not configured
Server name
--
Mask
Mask
Server name
--
IP
8.8.8.2
103
VLAN Interface
-- GigabitEthernet 2/0
Action
--
Action
--
Prefix length
Prefix length