HP VSR1000 Security Configuration Manual page 44

Tasks at a glance
(Required.)
(Optional.)
(Optional.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure up to 16 HWTACACS schemes. An HWTACACS scheme can be referenced by multiple ISP
domains.
To create an HWTACACS scheme:
Step
1. Enter system view.
2. Create an HWTACACS
scheme and enter
HWTACACS scheme view.
Specifying the HWTACACS authentication servers
You can specify one primary authentication server and up to 16 secondary authentication servers for an
HWTACACS scheme. When the primary server is not available, the device searches for the secondary
servers in the order they are configured. The first secondary server in active state is used for
communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can function as the
primary authentication server in one scheme and as the secondary authentication server in another
scheme at the same time.
To specify HWTACACS authentication servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
Specifying the HWTACACS authentication servers
Specifying the HWTACACS authorization servers
Specifying the HWTACACS accounting servers
Specifying the shared keys for secure HWTACACS communication
Specifying a VPN for the scheme
Setting the username format and traffic statistics units
Specifying the source IP address for outgoing HWTACACS packets
Setting HWTACACS timers
Displaying and maintaining HWTACACS
Command
system-view
hwtacacs scheme hwtacacs-scheme-name
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
34
Remarks
N/A
By default, no HWTACACS
scheme is defined.
Remarks
N/A
N/A