Second: <0 - Cisco TelePresence ISDN Link Reference Manual

Cisco TelePresence ISDN Link
Contents Introduction
xStatus ExternalNetwork Interface [1..1] Channel [1..n] Call [1..n] ChannelCause
Shows the reason why a call on the external network is disconnected. The cause values are specified
in ITU-T Recommendation Q.931 (the Cause information element).
Some common cause values are listed below; ITU-T Q.931 contains the complete list.
1: Unallocated (unassigned) number
2: No route to specified transit network
16: Normal call clearing
17: User busy
18: No user responding
21: Call rejected
28: Invalid number format
29: Facility rejected
31: Normal, unspecified
34: No circuit/channel available
41: Temporary failure
58: Bearer capability not presently available
65: Bearer capability not implemented
69: Requested facility not implemented
81: Invalid call reference value
88: Incompatible destination
100: Invalid information element contents
102: Recovery on timer expiry
127: Interworking, unspecified
128-255: Cisco specific codes
Value space of the result returned:
<Integer>
Example:
xStatus ExternalNetwork Interface 1 Channel 1 Call 10 ChannelCause
*s ExternalNetwork Interface 1 Channel 1 Call 10 ChannelCause: 16
** end
xStatus ExternalNetwork Interface [1..1] Channel [1..n] Call [1..n] Duration
Shows the duration (in seconds) of a call on the external network.
Value space of the result returned:
<Integer>
Example:
xStatus ExternalNetwork Interface 1 Channel 1 Call 10 Duration
*s ExternalNetwork Interface 1 Channel 1 Call 10 Duration: 771
** end
D14953.01 ISDN Link API Reference Guide IL1.0 June 2012.
© 2012 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration
H320 status
xStatus H320 NetType
46
xCommand
Shows which one of ISDN Link's communication interfaces is enabled. Note that only one interface is
enabled at a time.
BRI: The ISDN BRI interface is enabled.
PRI: The ISDN PRI interface is enabled.
External: The external network (NET) interface is enabled.
G703: For testing only.
Value space of the result returned:
<BRI/PRI/External/G703>
Example:
xStatus H320 NetType
*s H320 NetType: PRI
** end
API Reference Guide
xStatus xStatus Contact us
www.cisco.com