About Xpreferences - Cisco TelePresence ISDN Link Reference Manual

Cisco TelePresence ISDN Link
Contents Introduction

About xPreferences

The xPreferences command is used to set various preferences
for the RS-232/SSH sessions.
Each session can define preferences individually.
IMPORTANT! This command has various settings to define
the formatting of the XACLI output. It is therefore important to
define settings to match the parser used on the control system.
XACLI is designed to make parsing of data from the unit very
simple.
To get an overview of the supported xPreferences commands
and their value space, type ? or help after the xPreferences:
•
xPreferences ?
•
xPreferences help
The xPreferences output modes
•
Terminal: Line based XACLI output for use with line based
control systems
•
XML: Pure XML output for use with control systems that
understand XML.
D14953.01 ISDN Link API Reference Guide IL1.0 June 2012.
© 2012 Cisco Systems, Inc. All rights reserved.
About the API About the API xConfiguration
xPreferences ?
xpreferences usage:
xpreferences outputmode <terminal/xml>
xpreferences apiversion <1/2>
OK
16
xCommand xStatus
API Reference Guide
Contact us
www.cisco.com