Cisco TelePresence ISDN Link Reference Manual page 39

Cisco TelePresence ISDN Link
Contents Introduction
The SystemUnit commands
xCommand SystemUnit AdminPassword Set
Set an administrator password to restrict access to the ISDN Link.
Requires user role: USER
Parameters:
Password(r): <S: 0, 64>
Example:
xCommand SystemUnit AdminPassword Set Password: ""
*r SystemUnitAdminPasswordSetResult (status=OK):
** end
xCommand SystemUnit DateTime Set
Set the date and time for the system, if not available from NTP (Network Time Protocol). See the
xConfiguration NetworkServices NTP Mode
Requires user role: ADMIN
Parameters:
Year: <2008..2037>
Month: <1..12>
Day: <1..31>
Hour: <0..23>
Minute: <0..59>
Second: <0..59>
Example:
xCommand SystemUnit DateTime Set Year:2012 Month:7 Day:1 Hour:12 Minute:0
Second:0
*r SystemUnitDateTimeSetResult (status=OK):
** end
D14953.01 ISDN Link API Reference Guide IL1.0 June 2012.
© 2012 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration
xCommand SystemUnit DateTime Get
xCommand SystemUnit FactoryReset
39
xCommand xCommand
Read the time and date from the system.
Requires user role: USER
Example:
xCommand SystemUnit DateTime get
*r SystemUnitDateTimeGetResult (status=OK):
Year: 2012
Month: 7
Day: 1
Hour: 12
Minute: 0
Second: 0
** end
Reset the codec to factory default settings. The call logs will be deleted and all system parameters
will be reset to default values. All files that have been uploaded to the codec will be deleted. The
Release key and Option key will not be affected.
As a default the system restarts after the factory reset.
Requires user role: ADMIN
Parameters:
Confirm(r): <Yes>
Example:
xCommand SystemUnit FactoryReset Confirm: Yes
*r SystemUnitFactoryResetResult (status=OK):
** end
API Reference Guide
xStatus Contact us
www.cisco.com