Further Configuration - Zycoo CooVox-U20 Quick Installation Manual

Coovox series ip phone system

Hide thumbs Also See for CooVox-U20:

Table of Contents

Enlarged version

Step 2.

Configure the network information

There are three types of network connection. They are Static,

DHCP, PPPoE(Point-to-Point Protocol over Ethernet). You can find

detailed settings in the user manual.

3.3 Reset to factory

To reset the IP address to the default IP Address "192.168.1.100"

(WAN) or reset the login password to default value, press the

hardware reset button at the front panel more than 8 seconds.

After the device is rebooted, you can login the WEB interface

within the same subnet of 192.168.1.x.

Press the "Reset" button, and all the system data will be reset to

default; so if possible, back up the configuration file before reset.

4 Further Configuration

Thank you for the purchase of ZYCOO products. The above steps

introduce simple configuration for CooVox – U20 V2. For further

configuration, please refer to the user manual. If you have other

questions, please contact the local dealer or distributor from

which you purchased this product.

You can also browse our online FAQ resource at the ZYCOO Web site

first to check if it could solve your issue. If you need more support,

please contact ZYCOO support team.

ZYCOO online FAQ:

Http://zycoo.com/html/Knowledge Base. html

ZYCOO Support Form:

http://zycoo.com/html/Support.html

Support team mail address:

support@zycoo.com

Table of Contents

Show Quick Links

Table of Contents