Saving Settings Data - Omron FH Series Operation Manual

6-5

Saving Settings Data

After adjusting the settings data, you need to save the settings data to the flash memory of the FH
vision sensor. There are the following two ways to save the settings data.
(1) Right-click [Configuration and Setup] - [Device Group] - [FH-XXXX] - [Line X] in the Multiv-
iew Explorer and then click [Save data].
(2) Click the [Data save] button in the scene maintenance window.
The settings data can also be saved and managed as files.
• Scene data basis (Refer to 2-5-2 Managing Scenes on page 2-26)
• Scene group basis (Refer to 2-5-6 Managing Scene Groups on page 2-28)
• Processing unit basis (Refer to 2-6-2 Managing Processing Units on page 2-32)
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
6 Online Debugging
6 - 9
6