Table of Contents
Advertisement
Quick Links
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
PIXIM True Day/Night Bodied Camera
Advertisement
Table of Contents
Related Manuals for Genie CCTV DN83TSPX
Summary of Contents for Genie CCTV DN83TSPX
- Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
Page 2: Table Of Contents
■ Contents How to Use the Camera Features ■ Menu ■ Settings Precautions ㆍ PRESETS Components and Accessories ㆍ EXPOSURE ㆍ WDR Overview ㆍ WHITE BALANCE ㆍ DAY&NIGHT ■ Front View ㆍ IMAGE ADJ. ■ Side View ㆍ SPECIAL ■ Bottom View - CAMERA ID ■... -
Page 3: Features
■ Features Warning ■ The camera requires periodic inspection. High Resolution Colour for Crisp, Motion Detection Contact an authorised technician to carry out the inspection. Clear Video Since the camera detects motion without any ㆍ690TVL Effective (Colour) additional external sensor, you can monitor ㆍ800TVL Effective (B/W) activity more efficient. -
Page 4: Precautions
■ Precautions Do not drop the camera and protect Never keep the camera pointed Do not install the camera in Do not install or use the camera in an it from physical shocks. directly at strong light. extreme temperature conditions. environment where the humidity is high. -
Page 5: Components And Accessories
■ Components and Accessories Overview ■ Front View ① 1. Ultra High Resolution Day&Night CMOS Camera 2. Auto Iris Lens Connector Plug ③ ② 3. C-Mount Adapter ① Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. ②... -
Page 6: Side View
■ Overview Side View Bottom View ⑤ ④ ⑤ Tripod Mounting Bracket Screw Hole Used to fix the camera on a bracket or tripod. ④ Auto Iris Lens Connector The screw sizes for this hole are as follows: Used to connect Auto Iris Lens plug. 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197"... -
Page 7: Rear View
■ Overview Installation Procedures ■ ⑫ Auto iris lens selection switch Rear View ⑩ Change the mode to DC or VIDEO depending on the type of auto iris lens being used. REMOTE ⑬ Power IN Port Connect the power as specified for each model here. ⑭... -
Page 8: ㆍWhen Using C/Cs Mount Lens
■ Installation Procedures When Using C/CS Mount Lens 3. Remove the cover of the auto iris lens connector plug and solder the lens Before installing a lens, identify whether the lens to be installed is a C-Mount cable to the connector pin of the plug. or CS-Mount. -
Page 9: Connecting A Monitor
■ Installation Procedures Connecting to a monitor • When Using a C Mount Lens Connect the video output terminal located on the rear of the camera 1. Remove the protective cover at the front of this product and turn the CMount to the monitor. -
Page 10: Connecting Power
■ Installation Procedures Control via RS-485 Interface Connecting Power Since power specifications differ depending on the model, make sure The camera can be controlled by using an external controller equipped to check your model name and specifications before connecting power. with RS-485 communications. -
Page 11: How To Use The Camera
■ How to Use the Camera ■ Menu ■ Settings Settings can be made using the 5 buttons on the rear of the camera. SETUP menu ㆍNORMAL ㆍINDOOR ㆍOUTDOOR REMOTE PRESETS ㆍBACKLIGHT UP button SET button ㆍLENS SELECT ㆍBLC LEFT button POWER VIDEO OUT ㆍEXPOSURE MODE... -
Page 12: ㆍ Presets ㆍ Exposure ㆍ Wdr
■ How to Use the Camera SETUP EXPOSURE Select the function using Change the status using PRESETS NORMAL the UP or DOWN button. the LEFT or RIGHT button. EXPOSURE.. MIDDLE SETUP WHITE BALANCE PRESETS NORMAL DAY&NIGHT AUTO.. EXPOSURE.. IMAGE ADJ.. SPECIAL.. - Page 13 ■ How to Use the Camera ● BLC : To optimize the scene when there is a strong backlight behind SETUP the object. PRESETS NORMAL - ON / OFF selectable EXPOSURE.. MIDDLE ADVANCED BLC SETUP WHITE BALANCE PERCENTILE DAY&NIGHT AUTO.. IMAGE ADJ..
-
Page 14: ㆍ White Balance ㆍ Day&Night ㆍ Image Adj
■ How to Use the Camera WHITE BALANCE Use the White Balance function to adjust the screen colours. Note 1. Position the cursor to point to WHITE BAL on the SETUP menu screen, select using the Up and Down buttons. •... - Page 15 ■ How to Use the Camera IMAGE DAY&NIGHT SETUP FREEZE NIGHT MODE BW+burst FLIP COLOR SHARPNESS TIME DELAY COLOR GAIN GAMMA PREVIOUS PAGE.. FOCUS.. PREVIOUS PAGE.. ● COLOR : The picture is displayed in colour. ● B/W : The picture is always displayed in black and white. ●...
-
Page 16: Camera Id
■ How to Use the Camera ● FOCUS : To adjust the lens focus. SPECIAL CAMERA ID FOCUS DETECTOR VIDEO OUT.. FOCUS METER DZOOM MOTION SET FOCUS REGION.. PRIVACY MASK.. PREVIOUS PAGE.. SYNC RS485 SETUP.. RESET SET FOCUS REGION PREVIOUS PAGE.. ●... - Page 17 ■ How to Use the Camera ① Select the position where the ID is to be displayed by using the MOTION DETECTION LEFT and RIGHT buttons. ACTIVITY THR. ● VIDEO OUT : Move the cursor to select the video system MESSAGE TIME - VIDEO STANDARD : You can control NTSC / PAL, Video level, SETUP MOTION ZONE..
-
Page 18: Rs485 Setup
■ How to Use the Camera ● RS485 SETUP : This function sets up the camera communication ENABLE MASKS (1 to 6) ENABLE MASKS (7 to 12) status when controlling the camera through an external control device. MASK 1 MASK 7 MASK 2 MASK 8 RS485 SETUP... -
Page 19: Troubleshooting
■ Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an Problem Solution authorised technician. Problem Solution Colour is not correct. • Check the WHITE BAL settings in the SETUP menu. •... -
Page 20: Specifications (Ac24V / Dc12V)
Operating Temp. -10˚C to 50˚ -10˚C to 50˚ Weight Weight Appro. 400g Appro. 400g ※ POWER OPTION - DC12V Only : DN83TSPX/12 ※ POWER OPTION - AC230V Only : DN83TSPX/240 PIXIM True Day/Night Bodied Camera PIXIM True Day/Night Bodied Camera... - Page 21 ■ MENU...
-
Page 22: Pixim True Day/Night Bodied Camera
Model : DN83TSPX DN83TSPX/12 DN83TSPX/240 PIXIM True Day/Night Bodied Camera Instruction Guide GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543 www.geniecctv.com Edition. GN-APRIL 2012...
Need help?
Do you have a question about the DN83TSPX and is the answer not in the manual?
Questions and answers