Table of Contents
Advertisement
Geometry
11 Geometry
11.1 Geometry selection
36
In this menu, you can select the geometry for the
gloss measurement.
Choose Gloss Geometry from the Geometry menu.
You can choose between the representation of one,
two or all three geometries in the display.
The currently set angle combination is indicated in
the Geometry menu by a check mark.
Select the desired combination with the scroll wheel
and then confirm by pressing mode.
When Save is turned on, switching the geometry
automatically causes the program to switch to the
appropriate predefined area of memory.
Hide quick links:
Advertisement
Table of Contents
