Table of Contents
Advertisement
1. Remove any remaining pages from the document feeder.
2. Open the document feeder cover.
3. Gently remove the jammed paper from the document feeder.
If you see no paper in this area, go to step 5.
4. Close the document feeder cover. Reload the pages you removed, if
any, in the document feeder.
5. Open the scanner lid.
6. Seize the misfeed paper, and remove the paper from the feed area by
carefully pulling it to the right using both hands.
7. Close the scanner lid. Load the removed pages back into the document
feeder.
TIPS FOR AVOIDING PAPER CURLS
1. Open the rear door.
2. Pull down the pressure lever on each side about 45 degrees.
3. Close the rear door.
If the rear door does not close, you have pull down the pressure
lever too much.
TIPS FOR AVOIDING PAPER JAMS
By selecting the correct media types, most paper jams can be avoided.
When a paper jam occurs, refer to the next guidelines.
•
Ensure that the adjustable guides are positioned correctly. (See
"Loading paper in the tray" on page 55.)
Do not overload the tray. Ensure that the paper level is below the paper
capacity mark on the inside of the tray.
•
Do not remove paper from the tray while your machine is printing.
•
Flex, fan, and straighten paper before loading.
•
Do not use creased, damp, or highly curled paper.
Troubleshooting_ 108
1
scanner lid
Advertisement
Table of Contents
