Table of Contents
Advertisement
SCANNING ORIGINALS AND SENDING TO
YOUR COMPUTER (SCAN TO PC)
You can scan an image on the machine via the Samsung Scan Manager
program that is installed in your networked computer.
For USB connected machine
This is a basic scanning method for usb connected machine.
1. Make sure that the machine is connected to your computer and powered
on.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
(See "Loading originals" on page 53.)
3. Press Scan/Email on the control panel.
4. Press the up/down arrow to highlight Scan To PC and press OK.
5. Press the up/down arrow to highlight Local PC and press OK.
If you see Not Available message, check the port connection.
6. Press the up/down arrow until the application program you want
highlights and press OK.
Default setting is My Documents.
To add or delete the folder where the scanned file is saved, add or
delete the application program in Samsung Scan Manager >
Properties > Set Scan Button.
7. Press the up/down arrow until the setting you want highlights and press
OK.
•
Resolution: Sets the image resolution.
•
Scan Color: Sets the color mode.
•
Scan Format: Sets the file format in which the image is to be saved.
•
Scan Size: Sets the image size.
•
Scan Format appears only when you selected the Scan
destination to My Documents.
•
If you want to scan from the default setting, press Start.
8. Scanning begins.
•
Scanned image is saved in computer's My Documents > My
Pictures > Samsung folder.
•
You can use Twain driver to scan quickly in Samsung Scan
Manager program.
•
You can also scan by pressing Window's Start > Control
Panel > Samsung Scan Manager > Quick Scan.
For network connected machine
Make sure the printer driver is installed on your computer using the software
CD, since the printer driver includes the scan program. (See "Installing
wired network connected machine's driver" on page 40.)
1. Make sure that your machine and the computer are connected to a
network and Samsung Scan Manager is installed on the computer.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
3. Press Scan/Email on the control panel.
4. Press the up/down arrow to highlight Scan To PC and press OK.
5. Press the up/down arrow to highlight Network PC and press OK.
If you see Not Available message, check the port connection.
6. Select your registered computer ID, and enter the Password if
necessary.
•
ID is the same ID as the registered Computer ID for Samsung
Scan Manager.
•
Password is the 4 digit number registered Password for
Samsung Scan Manager.
7. Press the up/down arrow until the application program you want
highlights and press OK.
Default setting is My Documents.
To add or delete the folder where the scanned file is saved, add or
delete the application program in Samsung Scan Manager >
Properties > Set Scan Button.
8. Press the up/down arrow until the setting you want highlights and press
OK.
•
Resolution: Sets the image resolution.
•
Scan Color: Sets the color mode.
•
Scan Format: Sets the file format in which the image is to be saved.
•
Scan Size: Sets the image size.
•
Scan Format appears only when you selected the Scan
destination to My Documents.
•
If you want to scan from the default setting, press Start.
9. Scanning begins.
•
Scanned image is saved in computer's My Documents > My
Pictures > Samsung folder.
•
You can use Twain driver to scan quickly in Samsung Scan
Manager program.
•
You can also scan by pressing Window's Start > Control
Panel > Samsung Scan Manager > Quick Scan.
SCANNING ORIGINALS AND SENDING VIA
SMB/FTP (SCAN TO SERVER)
You can scan an image and send it to a total of five destinations via the
SMB or FTP.
Setting up an FTP server
To use an FTP server, you need to set up parameters to access the FTP
servers using SyncThru™ Web Service.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings
5. Click Add.
6. Select the Index number, from 1 to 20.
7. Enter a name in Alias for the Setup. This name will be displayed on
your machine.
8. Select IP Address or Host Name.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
The default port number is 21.
11. Check the box next to Anonymous if you want the FTP server to permit
access to unauthorized people.
This box is unchecked by default.
Scanning_ 75
FTP Setup
Server List.
Advertisement
Table of Contents
