Change Port Tab; Scanning And Sending To Smb/Ftp Server; Preparation For Scanning To Smb/Ftp - Samsung SCX-6545NX User Manual

Change Port tab

Local Scanner
Select when your machine is connected via USB or LPT port.
Network Scanner
Select when your machine is connected via network port.
• Auto detection on the network: Automatically detects your
machine.
• IP address: Enter in your machine's IP address to detect your
machine.
SCANNING ORIGINALS AND SENDING VIA SMB/
FTP (SCAN TO SERVER)
You can scan an image and send it to a server via the SMB or FTP.

Preparation for scanning to SMB/FTP

Select the folder and share it with the machine in order to receive the
scanned file.
The next steps are for SMB server setting using SyncThru™ Web
Service, and the setting for FTP server is the same as SMB. Apply the
same steps for setting up the FTP server.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Address Book.
5. Click Add.
6. Enter a name and speed number.
7. Check Add SMB.
8. Enter the server address in dotted decimal notation or a host name.
9. Enter the server port number, from 1 to 65535. The default port number
is 139.
10. If you want to allow the unauthorized person's access to SMB server,
check Anonymous. By default, this is unchecked.
11. Enter the login name and password.
12. Enter the domain name of the SMB server.
13. Enter the path of shared folder in the SMB server for storing the scanned
images.
56 _Scanning
14. Configure Scan folder creating policy, Filing Policy and File Name.
15. Click Apply.

Scanning and sending to SMB/FTP server

1. Press Scan from the Main screen.
If the authentication message shows, enter User Name and Password.
This message shows only when the network administrator has set the
authentication in SyncThru™ Web Service. (See "Managing your
machine from the website" on page 98.)
2. Press Scan to Server.
3. Place the originals face up in the DADF. Or you can place a single
original document face down on the scanner glass.
4. Adjust the document settings in the Image tab.
5. Select Duplex and Resolution in the Basic tab.
6. Press Scan to Server to show the SMB server list you entered in the
SyncThru™ Web Service.
7. Select the destination SMB server.
You can select up to five destinations using both of SMB or FTP
servers.
8. Press Start on the control panel.
The machine begins scanning and then sends the scanned image to the
specified server.
Scanning and sending multiple documents to SMB/
FTP server(s) at once
You can make multiple scanning jobs into a single file. And, therefore, you
can send the document with a single access to the server.
When the machine enters power saver mode, the jobs in the segment
list will be deleted to prevent accessing of the unexpected users.
1. Press Scan from the Main screen.
2. Press Scan to Server.
3. Set the scan features in the Advanced, Image, or Output tabs. (See
"Advanced tab" on page 52.)
4. Press the Advanced tab > Job Build.