Network Parameter Setting; Installing Wired Network Connected Machine's Driver - Samsung SCX-5636 Series User Manual

The printer's MAC address is the hardware serial number of
the on-board network interface and can be found on the
Network Configuration Report.
• IP Address: Enter a new IP address for your machine.
• Subnet Mask: Enter a new Subnet Mask for your machine.
• Default Gateway: Enter ta new Gateway for your machine.
6. Select Apply, then OK, and OK again. The printer will automatically
print the configuration report. Confirm that all the settings are correct.
Quit Safari. You may close and eject the installation CD-ROM. If
necessary, restart the computer's firewall. You have successfully
changed the IP address, subnet mask, and gateway.

Network parameter setting

You can also set up the various network settings through the network
administration programs such as SyncThru™ Web Admin Service and
SyncThru™ Web Service.

Installing wired network connected machine's driver

You must install the printer driver software for printing. The software
includes drivers, applications, and other user friendly programs.
Make sure that the network setup for your machine is completed. All
applications should be closed on your computer before beginning
installation.
Windows
The following procedure is based on Windows XP. The procedure
and popup window which appears during the installation may differ
depending on the operating system, machine features, or the
interface in use.
This is recommended for most users. All components necessary for
machine operations will be installed.
1. Make sure that the machine is connected to your network and
powered on. Also, your machine's IP address should have been set.
2. Insert the supplied software CD into your CD-ROM drive. The
software CD should automatically run and an installation window
appear.
• If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing "X" with the letter which
represents your drive. Click OK.
• If you use Windows Vista, click Start > All programs >
Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your drive and click OK.
• If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in
the User Account Control windows.
3. Click Next.
If necessary, select a language from the drop-down list.
4. Select Typical installation for a network printer and then click
Next.
If your printer is not connected to the network, the following
window will appear. Select a setup option you want, click Next.
Then the Set IP Address window appears. Do as follows:
a) Select a printer to be set with a specific IP address from the
list.
b) Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
c) Click Next, and go to step 6.
d) You can also set the network printer via SyncThru Web
Service, an embedded web server. Click Launch SWS on
Set IP Address windows. Your machine's embedded
website opens.
Network setup_ 40