Table of Contents
Advertisement
MESSAGE
MEANING
Paper Empty in
There is no paper in
[yyy]
the tray.
Paper is empty
in [yyy].
Load paper
Paper Jam in MP
Paper has jammed in
tray
the multi-purpose tray
area.
Paper Jam in tray 1
Paper has jammed in
the tray1 area.
Paper Jam in tray 2
Paper has jammed in
the tray2 area.
Paper mismatch
The paper size
[yyy]
specified in the printer
Load [zzz][xxx]
properties does not
Continue
Cancel
match the paper you
are loading.
Pickup roller is
The pickup roller has
worn
reached the end of its
lifespan.
[yyy] pickup roller
is worn.
Replace with new
one
Rear Door is open.
The rear door is not
securely latched.
Close it
Retry Redial?
The machine is
waiting for a specified
time interval to redial
a previously busy
station.
Replace New Toner
The toner cartridge
has reached the end
Replace with New
of its lifespan.
Toner
Scanner locked
The scanner module
is locked.
Self Diagnostics...
The engine in your
printer is checking
Please wait
some problems
detected.
SUGGESTED
SOLUTIONS
Load paper in the tray.
(See "Loading paper in
the tray" on page 55.)
Clear the jam. (See "In
the multi-purpose tray"
on page 109.)
Clear the jam. (See "In
tray 1" on page 109.)
Clear the jam. (See "In
optional tray 2" on
page 109.)
You can select the
option between
Continue or Cancel. If
you select Cancel , the
printing job will stop.
Load the correct paper
in the tray. If you select
Continue, printing job
will continue.
This message appears
when the pickup roller is
worn. Replace the
pickup roller with a new
one. Call for service.
Close the rear door until
it locks into place.
You can press OK to
immediately redial,
orStop/Clear to cancel
the redial operation.
Replace the toner
cartridge with a
Samsung-genuine toner
cartridge. (See
"Replacing the toner
cartridge" on page 125.)
Unlock the CCD lock.
(See "Front view" on
page 28. ) Or turn off the
machine and on again. If
the problem persists,
call for service.
Please wait a few
minutes.
Troubleshooting_ 114
MESSAGE
MEANING
Send Error
There is a problem in
DNS.
There is a problem
in DNS
Send Error
There is a problem in
POP3.
There is a problem
in POP3
Send Error
There is a problem in
SMTP.
There is a problem
in SMTP
Send Error
There is a problem in
SMTP authentication.
There is a problem
in SMTP
authentication
Send Error
There is a problem on
network interface
There is a problem
card.
on the NIC Card
Toner is empty
The toner cartridge
has reached the end
Toner is empty.
of its lifespan.
Replace with new
one
Toner is worn
The toner cartridge is
near the end of its
Toner is worn.
lifespan.
Replace with new
one
Toner is Low
The toner cartridge is
getting empty.
Toner is Low.
Order new one
Toner Not
The toner cartridge
Compatible
you have installed is
not for your machine.
Toner cartridge is
not compatible.
Check guide
SUGGESTED
SOLUTIONS
Configure the DNS
setting.
Configure the POP3
setting.
Change to the available
server.
Configure the
authentication setting.
Turn the power switch
off and on. If the
problem persists, call for
service.
You can select the
option among Stop or
Continue. If you select
Stop, the machine stops
printing. If you select
Continue, the machine
keeps printing, but the
quality cannot be
guaranteed. (See
"Replacing the toner
cartridge" on page 125.)
You can select the
option among Stop or
Continue. If you select
Stop, the machine stops
printing. If you select
Continue, the machine
keeps printing, but the
quality cannot be
guaranteed. (See
"Replacing the toner
cartridge" on page 125.)
Take out the toner
cartridge and thoroughly
shake it. By doing this,
you can temporarily
reestablish printing
operations. (See
"Redistributing toner" on
page 107.)
Install a
Samsung-genuine toner
cartridge designed for
your machine.
Advertisement
Table of Contents
