4. INSTALL STRIKE BOX AND STRIKE:
5. INSTALL LATCH AND OUTSIDE ESCUTCHEON:
A. Install latch into edge of door. Be sure to install it with the beveled edge facing door jamb.
B. If the door is less than 1-3/4 thick, slide spacer over standoffs and retractor on outside escutcheon.
C. Carefully install the outside escutcheon onto the door, passing the wiring harness through the 1" hole. Be sure that the
prongs on the latch engage with the retractor as shown in detail below.
D. Install latch guard from inside of door. (Do not install latch guard first or retractor will not clear the latch.)
OUTSIDE ESCUTCHEON
DETAIL
Prongs must engage
with retractor.
LATCH
(
INSTALL FIRST
Form 51005 Rev. D
CM5100 COMPUTER MANAGED CYLINDRICAL LOCK
)
WIRING HARNESS
(
SPACER
FOR DOORS LESS THAN
5
INSTALLATION MANUAL
1-3/4")
LATCH GUARD
(
)
INSTALL LAST
12-02-2002