Regulatory Notices - Wavecom GR64 GSM/GPRS Integrator's Manual

11

Regulatory Notices

The GR64 described in this manual conforms to the Radio and Telecommunications
Terminal Equipment (R&TTE) directive 99/5/EC with requirements covering EMC
directive 89/336/EEC and Low Voltage directive 73/23/EEC. The product fulfils the
requirements according to 3GPP TS 51.010-1, EN 301 489-7 and EN60950.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) The device must accept any interference received, including interference that may
cause undesired operation.
The GR64 modular transmitter is labelled with its own FCC ID number. In the normal
method of mounting the GR64 in a customer application the label is not visible to an
end-user. Similarly, the customer application itself may obscure the GR64 Wireless
CPU entirely. If the FCC ID is not visible when the Wireless CPU is installed inside
another device, then the outside of the device into which the Wireless CPU is installed
must display a label referring to the enclosed Wireless CPU. This exterior label can
use wording such as the following: "Contains Transmitter Wireless CPU FCC ID:
PY7BC051021" or "Contains FCC ID: PY7BC051021".
expresses the same meaning may be used.
FCC ID PY7BC051021
IC: 4170B-BC051021
GR64 Integrators Manual
Page: 98/104
The GR64 product has received GCF and FCC approval
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable
Any similar wording that